Dormer Windows

Dormer Windows glossary

The terms you'll come across, explained in plain English.

Box dormer
A dormer with vertical sides and a near-flat roof, often built full width across a rear roof slope to give the maximum standing height in a loft conversion.
Cheek
The vertical side wall of a dormer, running from the main roof up to the dormer roof. Cheeks are usually clad in tiles, slate, timber, lead or composite boards.
Completion certificate
A document issued by Building Control or a registered building control approver confirming that building work, such as a dormer loft conversion, meets the Building Regulations.
Dormer
A structure that projects vertically from a sloping roof, with its own roof and walls, built to hold a window and add headroom and usable floor space to a loft or upper room.
EPDM
Ethylene propylene diene monomer, a synthetic rubber membrane laid in a single sheet on flat roofs, including dormer roofs, as a durable alternative to traditional felt.
Gable-fronted dormer
A dormer with a pitched roof and a triangular gable wall above the window at the front. A traditional style that suits front elevations and period homes.
GRP
Glass reinforced plastic, often called fibreglass. Laid wet over boards and cured to form a jointless hard roof covering, popular on dormer and other flat roofs.
Hipped dormer
A dormer with three sloping roof faces, at the front and both sides, that blend back into the main roof. Common on Victorian and Edwardian houses.
Lawful Development Certificate
A certificate from the local council confirming that a proposed or completed development, such as a dormer, is lawful and does not need planning permission.
Lead valley
A channel lined with sheet lead where two roof slopes meet, such as where a pitched dormer roof joins the main roof, carrying rainwater down to the gutter.
Padstone
A solid block of concrete or engineering brick built into a wall to spread the concentrated load from the end of a steel beam, as used in loft conversions.
Permitted development
Rights that allow certain extensions to houses in England without a full planning application, subject to limits. Many rear dormers qualify within set volume allowances and conditions.
Soakers
Small pieces of lead or metal fitted between each course of tiles where a roof meets a vertical surface, such as a dormer cheek, usually covered by a flashing.
Stepped flashing
A strip of lead dressed in steps up the side of an abutment, tucked into joints, so that water running down the roof is kept out of the junction.
Trimmer
A timber member fixed across rafters where they are cut to form the dormer opening, carrying the loads of the cut rafters to the rafters either side.

Get a free dormer windows quote

Tell us what you need and we'll come back with a clear price.

Request a quote